31
Version 17.01, as of: 27-Jun-2017
4.5.4 Fitting „Mammut Form S+“ roof hook for slate and metal shingle roofs
Step 1:
Fix the position of the roof hook in such a way, that this can be fastened with the screws in the rafter.
Observe the edge distances according Figure 121
Replace the slate plate with an individual manufactured metal plate (1). Not necessary for metal
shingle roofs.
Step 2:
Position the mounting plate (2) an d fix it with the wood screws (3) in the rafter.
Important!
The mounting plate must lie completely on the metal plate or the metal shingle.
To Next Page
Loading...