Magnetic sensor, LiYCY 2x0.34
Shielded
Input signal, LiYCY 2x0.34/0.5
Shielded
EMC INSTALLATION
EMC GLAND
Motor cable
Ölex Classic 110 CY/7G0.75
Shielded
Incoming EKK 3G1.5
Not shielded
EMC glands must be used for shielded cables.
e above cables or equivalent must be used to comply with the EMC Directive.
NOTE!
When connecting the shield to the EMC gland, it is important to do so as shown above.
12
To Next Page
Loading...