22 23
BIKE SET-UP TIPS AND TRICKS BIKE SET-UP TIPS AND TRICKS
With the Tranny29, we
pioneered our cable port system
that you also see on the HD3.
The routing is also fairly straight
forward, with one twist. We
like to route the rear derailleur
housing before the two halves
of the frame are assembled
(and before you install your BB!).
Since we ship the frames with
both halves assembled, the
person building the bike will
have to remove the slot machine
hardware, separate the frame
halves and start threading
housing from the front of the bike,
through the slot machine, and
into the drive-side chainstay.
Tranny29
Driveside Cable Routing
Tranny29
Non-Driveside Cable Routing
To Next Page
Loading...
Need help?
General
