EasyManua.ls Logo

ibis RIPMO - Setting Sag

ibis RIPMO
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36 37


CLICKS FROM CLOSED
PRESSURE (PSI) HSC LSC HSR LSR
40 8 16-14 8 16-14
45 8 15-13 8 16-14
50 8 14-12 8 16-12
55 7 13-11 8 16-12
60 7 12-10 7-8 15-11
65 7 11-9 7-8 14-10
70 6 10-8 7-8 14-10
75 6 9-7 6-8 14-10
80 6 8-6 6-8 14-8
85 5 7-5 6-8 14-8
90 5 6-4 5-8 14-8
RANGE
0-8 0-16 0-8 0-16

25% SAG
RIDER WEIGHT
130MM
GRIP RECOMMEND
REBOUND SETTINGS
LB PSI
120-130 58 13
130-140 63 12
140-150 68 11
150-160 72 10
160-170 77 9
170-180 82 8
180-190 86 7
190-200 91 6
200-210 96 5
210-220 100 4
220-230 105 3
230-240 110 2
240-250 114 1
MAX
DO NOT EXCEED
MAXIMUM AIR PRESSURES
120 RANGE 0-13
FOX 34 PERFORMANCE GRIP
REBOUND ADJUSTER
Rebound controls the rate of
speed at which the fork extends
after compressing.

Use this diagram as a starting point
for your compression adjusters.
Turn your compression adjusters to
the closed position (full clockwise)
until they stop. Then back them out
(counter-clockwise) to the number
of clicks shown below.
High-Speed Compression
adjustment is useful to control fork
performance during bigger hits,
landings, and square-edged bumps.
Low-Speed Compression
adjustment is useful to control fork
performance during rider weight shifts,
G-outs, and other slow inputs.
FOX FLOAT 34 GRIP 2
REBOUND ADJUSTERS
RIDE


Related product manuals