2.
Press Enter. The 5250 Emulation Adapter Test Menu, similar to
the one shown in Figure 7, appears.
Note:
If
this screen does not appear, the adapter has not been
configured for testing. For directions, see "Preparing to Run the
Diagnostics" on page
9.
~---------
5259
Adapter Test
Menu
----------
Use
the
H keys
to
move
the
selection
bar
to
indicate
your
choice
and
then
press
Enter.
Start
Tests
View
Selection
Sunnnary
Change
Testing
Options
Configure
Adapter
Esc=Return Fl=Help
F2=Keys
Help F3=Quit
Figure
7.
5250 Emulation Adapter Test Menu
3.
Use the up and down arrow keys to move the selection bar to the
"Change Testing Options" option. Then press Enter. The
Change Test Options screen, similar
to
the one shown in
Figure 8, appears. To move between fields on this screen, use
the up and down arrow keys.
----------
Change
Testing
Options
----------
Use
the
H keys
to
move
the
selection
bar
to
an
option
and
then press Fl
for
information about the option or press Enter
for
the option
selection
list.
Press
F2
for
additional
key information.
Run
Tests .
Line
Tests
Session
0
Session
1
Session
2
Session
3
Session
4
Session
5
Session 6
Esc=Return Fl=He 1 p
F2=Keys
He
1 p
F19=Save
Figure
8.
Change Testing Options Screen
Continuously
Online
0
1
2
3
4
5
6
Part 2. User's Guide 17
To Next Page
Loading...
Need help?
General
