IBM 5250 - Page 37

5. If the Support field on the Change Adapter Configuration screen
does not indicate 'Point Enable':
a. From the Change Adapter Configuration screen, select the
Change PCMCIA Support option. The Change PCMCIA
Support screen, similar to the one shown in Figure 18,
appears.
~-------Change Adapter Configuration-------~
Adapter: IBM 5259 Express PC Card
Support: Point Enable
Change 5259 Emulatfon PCMCIA Adapter
Change PCMCIA Controller
Change PCMCIA Support
Save Changes
IBM 5259 Express PC Card Configuration
Socket Location: 1
I/O Port Address: 2718-271F
Memory Address: DC90-DDFF
Interrupt Level: 5
PCMCIA Controller Configuration
Controller: INTEL 82365
Number of Sockets: 2
Controller I/O Address: 03E9
Esc=Return Fl=Help F2=Keys Help F10=Save
Figure 18. Change PCMCJA Support Screen
b. From the Change PCMCIA Support Screen, select the Point
Enable option. The Change Adapter Configuration screen
appears again.
6. Change your adapter configuration settings as required using the
directions in "Changing Adapter Configuration Settings" and in
"Changing PCMCIA Controllers" on page 32.
Changing Adapter Configuration Settings
To change adapter configuration settings:
1. From the Change Adapter Configuration screen, select the
'Change 5250 Emulation PCMCIA Adapter' option. The
'Change 5250 Emulation PCMCIA Adapter' screen, similar to the
one shown in Figure 19 on page 32, appears.
Part 3. Reference 31