3.8.2 Setting and Changing the Operational Features
|Three ways to set and change the operational features are:
Start the backup copy of the Reference Diskette each time you want to
use it. For more details, see "Starting the Set Features from the
Reference Diskette" in topic 3.8.3.
| Store the Set features program, including the control program, on your
| hard disk or diskette.
| Once the program is resident on your hard disk or diskette, you can
| call and change any of the operational features by entering commands
at the command line, or by running a batch file containing these
commands. For more details, see "Starting the Set Features Program
with Commands" in topic 3.8.4.
| Copy sample batch programs from the backup copy of the Reference
| Diskette onto your hard disk or diskette. For more details, see
"Using the Sample Batch Programs" in topic 3.8.5.
PS/2 Model L40 SX Quick Reference
Setting and Changing the Operational Features
¦ Copyright IBM Corp. 1991
3.8.2 - 1
To Next Page
Loading...
Need help?
General