v BladeCenter Advanced Management Module User’s Guide: This document
provides general information about your management module, including
information about features, how to configure the management module, and how
to get help.
v BladeCenter Advanced Management Module Command-Line Interface Reference
Guide: This document explains how to use the management-module
command-line interface to directly access BladeCenter management functions as
an alternative to using the Web-based user interface. The command-line interface
also provides access to the text-console command prompt on each blade server
through a Serial over LAN (SOL) connection.
v BladeCenter H Problem Determination and Service Guide: This document
contains the information to help you solve problems, and it contains information
for service technicians.
v BladeCenter Advanced Management Module Installation Guide: This document
contains instructions for installing the management module in the BladeCenter
unit and creating the initial configuration.
v BladeCenter Advanced Management Module Messages Guide
This document contains a complete list of all non-device specific events and
recommended actions, sorted by event ID. Device specific event information is in
the documentation for the device.
v Serial over LAN Setup Guide
This document explains how to update and configure BladeCenter components
for Serial over LAN (SOL) operation. The SOL connection provides access to the
text-console command prompt on each blade server and enables the blade
servers to be managed from a remote location.
Additional documents might be included on the IBM BladeCenter Documentation
CD.
Chapter 1. Introduction 7
To Next Page
Loading...
