Related concepts
Installing features and replacing parts
Expansion units
Related tasks
Accessing the ASMI using a Web browser
Accessing the ASMI using an ASCII terminal
Place the model 51x or 710 in the service position
Powering the system on and off
Related reference
References
Related information
Adapters, Devices, and Cable Information for Multiple Bus Systems
Cabling the OpenPower 710 and the Hardware Management Console
(HMC)
Learn how to cable the expansion units, connect the external cables, power cords, and HMC cables, attach
devices, and route the cables after you install all of your hardware features or replace parts.
222 System i and System p: Cabling your server
To Next Page
Loading...
