Need help?Do you have a question about the IBM 9306 and is the answer not in the manual?
Procedure for diagnosing power problems for IBM PC Server Rack Enclosure and IBM Rack enclosure (Type 9306).
Procedure to prevent injury and damage when performing service on the rack.
Features and installation for NetBAY 42 and NetBAY 25 Rack cabinets.
Step-by-step guide for installing a rack cabinet, including preparing for optional devices.
Lists part numbers (FRUs) for the Type 9306 Model 200 rack enclosure components.
Details the IBM NetBAY22, Type 9306, Model 200 enclosure and its parts.
Describes optional expansion models to increase IBM PC Server Rack capacity.
Instructions for removing and installing the server selector unit, located in the upper rear of the rack.
Instructions for removing the power distribution unit (PDU) from the rack cabinet.
Procedures for removing single and dual latch rail trays from rack cabinets.
Procedure for removing the keyboard tray from the rack cabinet.
Lists part numbers for 19-inch rack enclosures, including Models 9QS, 9TS, 9QX, and 9TX.
Lists part numbers for 24-inch rack enclosures, including Models 4QS and 4QX.
Procedures for removing and installing side and top 6U panels on NetBAY 42 Enterprise Rack.
Instructions for removing and installing front and rear doors on NetBAY 42 Enterprise Rack.
Instructions for lowering leveling feet and installing stabilizer brackets for rack stability.
Procedure to attach multiple NetBAY 42 Rack cabinets together to form a suite.
Lists part numbers (FRUs) for the NetBAY 42 Enterprise Rack enclosure components.
Describes NetBAY3 enclosure features, locations, and casters.
Lists part numbers (FRUs) for NetBAY3 enclosure components.
Describes NetBAY3E enclosure features, locations, and casters.
Instructions for installing the 1U Flat Panel Monitor Console Kit in a rack cabinet.
Procedure for installing the flat panel monitor and keyboard tray, requiring two people.
Instructions for installing a console switch behind the flat panel monitor and keyboard tray.
Guidance on securing devices to rack mounting flanges using rails or cage nuts.
How to install cage nuts using a cage-nut-insertion tool or a flat-blade screwdriver.
General procedure for installing an Uninterruptible Power Supply (UPS) in a rack cabinet.
Procedures for installing a Power Distribution Unit (PDU) vertically or horizontally in a rack.
General procedures for installing small and large servers into a rack cabinet.
Instructions for installing storage expansion units on fixed rails in a rack cabinet.
Procedure for installing a Fibre Channel RAID controller unit on fixed rails in a rack.
Instructions for installing a Fibre Channel hub and fixed mounting tray.
Procedure for installing an SP switch on fixed rails in a rack cabinet.
Instructions for installing a fixed shelf to hold devices within a rack cabinet.
Procedure to install a keyboard tray and keyboard into a rack cabinet.
Instructions for installing a kit to mount a flat panel monitor in a keyboard tray.
Procedure for installing a monitor shelf in a rack cabinet, which can also house a console switch.
Information about IBM NetBAY Console Switches (1x4 and 2x8 models).
Procedure to install a console switch vertically in the side of a rack cabinet.
Procedure to install a console switch horizontally in 1U of EIA rack mounting space.
Essential safety information required before servicing IBM servers or supporting equipment.
Provides caution and danger safety notices in multiple languages.
Guide to identify potentially unsafe conditions and assess hazards.
Procedures for safely handling computer parts sensitive to electrostatic discharge (ESD).
Details electrical grounding requirements for operator safety and system function.
Information to assist in problem determination, including hardware and software factors.
To Next Page
General