Expansion Rack (42E)
Locations
The following sections contain information on specific equipment locations.
The primary rack cabinet comes with side panels installed. Remove the side panels
from a primary rack cabinet, or the outermost rack cabinets in a suite, before you
install or remove optional devices.
Note: You do not need to remove the top 6U side panels unless you are removing
the top 6U portion of the rack cabinet.
Removing and installing panels
Removing and installing the side panels
Use the following procedure to remove the rack side panels:
NetBAY 42 Enterprise Rack (Type 9308 Models 42P, 42X, 4SA, 4SB, 42S, 42E) 59
To Next Page
Loading...
