To Next Page

To Previous Page

50 Brocade 2-Port 10GbE Converged Network Adapter for IBM BladeCenter Installation and User’s Guide

Procedures

9. Select the LUN on the target device you that want to designate as the boot LUN for the host.

This must be the same LUN that you bind to the adapter port using the storage system’s

management or configuration utility.

NOTE

You only need to select the bootable LUN once. After the first boot, the same LUN will be used

until changed through the BIOS Configuration Utility.

10. Press Enter. The selected device will be added to the list of boot devices for the adapter.

11. Save or exit the configuration utility.

• To save the configuration, press the Alt and S keys.

• To exit without saving press the Alt and Q keys.

Questions and Answers:

Need help?

Do you have a question about the IBM Brocade and is the answer not in the manual?

IBM Brocade Specifications

General