Setup
Important: Before connecting the monitor, turn off the computer
and attached devices. Also ensure the power at the electrical
outlet matches the power requirements of the monitor. Refer to
the
Specifications
section on page 16 /17 for more details.
Attaching the Stand
1. Place the monitor face down on a soft surface to prevent
the screen being scratched.
2. Insert the hooks (1) into the matching slots on the underside
of the monitor (2).
3. Slide the base towards the front of the monitor until the
latch (3) clicks into the locked position.
2
(1)
(3)
(2)
To Next Page
Loading...
