IBM 6331 User Manual

E-1
POWER SAVING
The monitor is driven to different power saving states
when it receives control signals from the display
controller. This process meets the Environmental
Protection Agency (EPA) Energy Star requirements
and reduces power consumption.
The monitor works in the following four states
according to the VESA-standard Display Power
Management Signal:
The power saving states are sustained until a control
signal has been detected or the keyboard or mouse is
activated. The recovery time from STANDBY/
SUSPEND state to ON state occurs within three
seconds. It usually takes less than 15 seconds from
OFF state back to ON state.
State
Power
Consumption
LED
Color
ON Normal Green
STANDBY <15W Yellow
SUSPEND <15W Yellow
OFF < 5W Amber
INTRODUCTION
This microprocessor-based, digital control 15-in.
color monitor is a high-performance, easy-to-use
product. This monitor uses a mini-neck CRT to
reduce power consumption during normal operation.
It also employs the latest on-screen-menu technology.
The microprocessor capability offers 13 most
commonly used factory-preset VESA timing modes,
and eight modes for the user to adjust to the special
timings that user might prefer.
This manual provides operating, usage, and safety
information for your monitor.
PACKING CONTENTS
The package contains:
• CRT monitor (M/T 6331)
• ac power cord
• User manual
UNPACKING
PROCEDURE
REPACKING
Save the origional box and all packing material for
future shipping needs.
* Packing materials and product are recyclable.
1
2
3
4
5
113393-0A-E.pm6 8/1/00, 6:38 PM1

IBM 6331 Specifications

General

Display Type	CRT
Dot Pitch	0.28 mm
Max Resolution	1024 x 768
Horizontal Refresh Rate	30 - 54 kHz
Resolution	1024 x 768
Input Connector	VGA
Vertical Refresh Rate	50-120 Hz
Color Support	16.7 million colors

Summary

User Controls and Indicators

Control Panel Overview

Identifies and describes the function of the monitor's physical buttons and power LED.

Using the On-Screen Menu

On-Screen Menu Navigation

Details how to access, navigate, and select options within the monitor's on-screen display menu.

Individual Screen Adjustments

Contrast and Brightness Adjustment

Instructions for adjusting screen contrast and brightness for optimal viewing quality.

Horizontal Size and Position

Vertical Size and Position

Pincushion and Trapezoid Correction

Rotation Adjustment

Color, Language, and Display Settings

Color Selection and User Color

Troubleshooting, Servicing, and Connectors

Troubleshooting Guide

Lists common monitor problems and provides checks and adjustments to resolve them.

Servicing Information

Signal Connector Information

Technical Specifications

Display and Performance Specs

Key technical specifications including screen size, dot pitch, resolution, and refresh rates.

Environmental and Power Specs

Details on power input, consumption, operating conditions, and physical dimensions.

Preset Display Modes

Supported Preset Modes

Lists various display resolutions with corresponding horizontal and vertical frequencies supported by the monitor.