CHASSIS
SERVICE MANUAL
SPECIFICATIONS
D99
6550-23N/63N
US Model
Canadian Model
AEP Model
6550-23N : Chassis No. SCC-L29D-A
6550-63N : Chassis No. SCC-L29G-A
6550-23S/63S
S. Hemisphere Model
6550-23S : Chassis No. SCC-L29E-A
6550-63S : Chassis No. SCC-L29H-A
6550-33N/73N
Japan Model
6550-33N : Chassis No. SCC-L29F-A
6550-73N : Chassis No. SCC-L29J-A
COLOR MONITOR
6550-23N/23S/33N/63N/63S/73N
MODEL
SPEC.
BODY COLOR DEST.
6550-23N US, CND, AEP
6550-23S WHITE TYPE SH
6550-33N J
6550-63N US, CND, AEP
6550-63S BLACK TYPE SH
6550-73N J
Picture tube 0.24 mm aperture grille pitch
17 inches measured diagonally
90-degree deflection
Viewable image size Approx. 327 × 243 mm (w/h)
(12
7
/
8
× 9
5
/
8
inches)
16.0” viewable diagonal
Resolution Horizontal: Max. 1600 dots
Vertical: Max. 1200 lines
Standard image area Approx. 312 × 234 mm (w/h)
(12
3
/
8
× 9
1
/
4
inches)
Deflection frequency Horizontal: 30 to 94 kHz
Vertical: 48 to 120 Hz
300 < Total Line < 1700
AC input voltage/current
100 to 240 V, 50 – 60 Hz, Max. 1.7 A
Power consumption Max. 130 W
Dimensions Approx. 406 × 416 × 431 mm
(w/h/d)
(16 × 16
1
/
2
× 17 inches)
Mass Approx. 20 kg (44 lb 1 oz)
* Recommended horizontal and vertical timing condition
• Horizontal sync width should be more than 1.0 µsec.
• Horizontal blanking width should be more than
3.0␣ µsec.
• Vertical blanking width should be more than 500 µsec.
Design and specifications are subject to change without
notice.
To Next Page
Need help?
General
