Power on the system
To power on the system, follow these steps:
1. DANGER
An
electrical outlet that is not correctly wired could place hazardous
voltage on metal parts of the system or the products that attach to the
system. It is the customer’s responsibility to ensure that the outlet is
correctly wired and grounded to prevent an electrical shock. (RSFTD201)
Plug in the system unit and system unit console into an electrical outlet. Plug
in everything you previously unplugged such as printers and displays.
2. Is your system unit an iSeries 270, 800, 810 or 820, 825, 830, 840, 870, 890?
__ 270, 800, or 810: Continue with the next step.
__ 820, 825, 830, 840, 870, 890: Go to step 5.
3.
Look at the Function/Data display on the control panel.
4. Does 01 B V=S appear in the Function/Data display with IPL mode Normal
(OK) selected?
__ Yes: Go to step 7 on page 26.
__ No: Do the following:
__ a. Press the Mode Select button until the Manual mode indicator (a
small hand) lights up.
__ b. Press the Increment/Decrement push button until 02 appears in
the Function/Data display.
__ c. Press the Enter push button on the control panel.
__ d. Press the Increment/Decrement push button until B appears in the
Function/Data display.
__ e. Press the Enter push button on the control panel.
__ f. Press the Increment/Decrement push button until S appears in the
Function/Data display
__ g. Press the Enter push button on the control panel.
__ h. Press the Mode Select button until the Normal indicator (OK)
lights up.
__ i. Press the Increment/Decrement push button until 01 appears in the
Function/Data display.
__ j. Press the Enter push button on the control panel.
01 B S should appear in the Function/Display display. If it does
not appear, repeat steps 4a through 4j. If it does, go to 7 on page
26.
5.
Look at the Function/Data display on the control panel.
6. Does 01 B V=S appear in the Function/Data display?
__ Yes: Continue with the next step.
__ No: Do the following:
__ a. Press the Increment/Decrement push button until 02 appears in
the Function/Data display.
__ b. Press the Enter push button on the control panel.
© Copyright IBM Corp. 2000, 2005 25
To Next Page
Loading...
Need help?
General