Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
5311 System LIC program exception occurred
LPAR configuration data does not match current system configuration. The
system will not IPL past DST until the problem is corrected.
Following is a list of problems which may have caused this SRC to be
reported:
v Non-configured disk unit which was previously a load source on a
partitioned system.
v Load source configuration data does not match partition for which it is
being used.
v Load source configuration data does not match system serial number for
which it is being used.
v Load source configuration data is newer than primary partition
configuration data.
Perform LPAR-PIP01.
LPARSUP
5312 System LIC program exception occurred
LPAR configuration data informational error.
The LPAR configuration data was found to be or inconsistent on a
secondary partition’s load source. The data was automatically updated to
the current system level.
5313 System LIC program exception occurred
LPAR configuration data informational error.
The LPAR configuration data was found to be inconsistent on a primary
partition and could only be corrected with an older copy of the data.
LPARCFG
5340 Secondary partition not running at optimum.
Check the Primary partition’s Product Activity Log for system processor
entries from approximately the same time. Perform the actions indicated
for those entries. For more information on Logical Partitioning, see the
Logical Partitioning Information in the iSeries Service Functions.
5341 Secondary partition not running at optimum.
Check the primary partition Product Activity Log for system memory
entries from approximately the same time. Perform the actions indicated
for those entries. For more information on Logical Partitioning, see the
Logical Partitioning Information in the iSeries Service Functions.
5342 Secondary partition not running at optimum.
Check the Primary partition’s Product Activity Log for system processor
entries from approximately the same time. Perform the actions indicated
for those entries. For more information on Logical Partitioning, see the
Logical Partitioning Information in the iSeries Service Functions.
5343 Secondary partition not running at optimum.
Check the Primary partition’s Product Activity Log for system memory
errors from approximately the same time. Perform the actions indicated for
those entries.
For more information on Logical Partitioning see the Logical Partitioning
Information in the iSeries Service Functions.
B6xx (including A6xx)
274
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)
To Next Page
Loading...
Need help?
General