Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
5344 Secondary partition not running at optimum.
The interactive performance specified in the configuration data for this
partition could not be met.
Contact your next level of support.
LPARSUP
5350 Secondary partition software release not supported.
The logical partition software version is outside the supported release
delta. Check the Release Delta from the Primary partition ″Display
Partition Release Level″ screen.
Check the LPAR documentation for the release level of the Primary
partition and determine what the supported Release Delta is.
5380 System LIC program exception occurred
Record the Procduct Activity Log (PAL) hex data for this SRC or print the
PAL entry.
Contact your next level of support.
LPARSUP
5390 System LIC program exception occurred
Record the Product Actvity Log (PAL) hex data for this SRC or print the
PAL entry.
Contact your next level of support.
LPARSUP
5555 SLIC I/O DASD subsystem error recovery in progress.
6900 System bus error
If you are working on a model 270, 7xx, or 8xx, the possible failing items
are SIADPCD and MA_BRDG. Continue by working those symbolic FRUs.
The copper bus, bus 4 in the SPD migrated tower, is inoperative due to a
stuck line or a parity error. Any SPD system bus-related hardware on bus 4
may have failed including the HSL I/O bridge or HSL cable connecting
SPD bus 4 to the HSL loop.
Perform BUS-PIP1.
FI00065
AJDG301
6901 Bus Expansion Adapter card failed
The copper bus, the first SPD bus in the system unit or migrated tower, has
failed due to an internal chip error on the local bus adapter.
Perform BUS-PIP1.
For this reference code the failing item list presented in the ″Service Action
Log″ can be different from the failing item list documented here. That is
due to the differences in system models and features installed.
If the ″Service Action Log″ is available then use the failing item list
presented there for servicing this reference code.
If the ″Service Action Log″ is not available then use the failing item list
documented here. By following the procedures in the symbolic FRUs listed
here you will isolate to the correct FRU list based on system model and
features installed.
LBUSADP
AJDG301
B6xx (including A6xx)
System Reference Codes 275
To Next Page
Loading...
Need help?
General