1.2.10 Suspend and Resume Functions
The suspend and resume functions are unique methods to minimize the use of
power from the battery. When the computer enters suspend mode, all tasks
are suspended and their present states are stored in memory to save power.
In suspend mode, the system is placed in a sleep state where only a
minimum amount of power is consumed.
When the system returns to operating mode using the resume function, the
system restores the same states as when it entered suspend mode.
The system enters suspend mode when:
¯ The time specified by the
Advanced Features program has elapsed.
¯ A battery-low condition (blinking an amber LED) is detected.
command in the Set Advanced Features program has been
¯ The temperature is outside the operating range.
¯ The humidity is outside the operating range.
The system returns to operating mode when:
command in the Set Advanced Features program
before entering suspend mode.
¯ The "ring indicator" on the communication interface is detected.
If a battery pack is replaced during suspend mode with the display
opened, close the display and open it again to return to operating
IBM PS/2 Model CL57 SX HMR
Suspend and Resume Functions
_ Copyright IBM Corp. 1991
To Next Page
Loading...
Need help?
General