IBM Personal System/2 CL57 SX - Errors During POST

2.1.2 Errors during POST
If the POST detects a problem during access on the system partition, an
I99800XX
or
I9990303
error code is displayed. If this happens, do the
following:
1. Start the system with the customer's backup copy of the Reference
Diskette.
2. Select the
Backup/Restore system programs
from the Main Menu.
3. Select the
Restore the system partition
to load the system setup and
utility programs, and the customer and advanced diagnostic programs
onto the system partition of the hard disk.
IBM PS/2 Model CL57 SX HMR
Errors during POST
_ Copyright IBM Corp. 1991
2.1.2 - 1