IBM Personal System/2 CL57 SX - Keyboard and Top Cover Removal

6.1 1010 Keyboard and Top Cover
CAUTION:
Before removing any FRU, power-off the system, unplug all power cords from
electrical outlets, remove the battery packs, then disconnect any
interconnecting cables.
+---
Attention
----------------------------------------------------------+
¦ ¦
¦ Removals of both keyboard and top cover must be performed ¦
¦ concurrently. The keyboard can be removed with the top cover on. The ¦
¦ keyboard cables, however, cannot be reconnected unless the top cover ¦
¦ is removed. ¦
¦ ¦
+------------------------------------------------------------------------+
Remove the keyboard first, then remove the top cover.
Subtopics
6.1.1
Keyboard Removal
6.1.2
Top Cover Removal
IBM PS/2 Model CL57 SX HMR
1010 Keyboard and Top Cover
_ Copyright IBM Corp. 1991
6.1 - 1