Table 6. Supported feature codes that affect environmental requirements
1
(continued)
Feature codes (FCs) Feature code names
ESD2 / EQD2 1.14 TB (IBM i) 10K RPM SAS HDD (Gen2-S)
ESD3 / EQD3 1.2 TB (AIX/Linux) 10K RPM SAS HDD (Gen2-S)
ESDU 139 GB (IBM i) 15K RPM SAS HDD (Gen3)
ESDT 146 GB (AIX/Linux) 15K RPM SAS HDD (Gen3)
ESDA 283 GB (IBM i) 15K RPM SAS HDD (Gen3)
ESDB 300 GB (AIX/Linux) 15K RPM SAS HDD (Gen3)
ESDS 283 GB (IBM i) 10K RPM SAS HDD (Gen3)
ESDR 300 GB (AIX/Linux) 10K RPM SAS HDD (Gen3)
ESD4 571 GB (IBM i) 10K RPM SAS HDD (Gen3)
ESD5 600 GB (AIX/Linux) 10K RPM SAS HDD (Gen3)
ESD8 1.14 TB (IBM i) 10K RPM SAS HDD (Gen3)
ESD9 1.2 TB (AIX/Linux) 10K RPM SAS HDD (Gen3)
ESEY 283 GB (IBM i) 15K RPM 4KN SAS HDD (Gen2-S)
ESEZ 300 GB (AIX/Linux) 15K RPM 4KN SAS HDD (Gen2-S)
ESFA 283 GB (IBM i) 15K RPM 4KN SAS HDD (Gen3)
ESFB 300 GB (AIX/Linux) 15K RPM 4KN SAS HDD (Gen3)
ESFE 571 GB (IBM i) 15K RPM 4KN SAS HDD (Gen3)
ESFF 600 GB (AIX/Linux) 15K RPM 4KN SAS HDD (Gen3)
ESFN 571 GB (IBM i) 15K RPM 4KN SAS HDD (Gen2-S)
ESFP 600 GB (AIX/Linux) 15K RPM 4KN SAS HDD (Gen2-S)
ESDE 571 GB (IBM i) 15K RPM SAS HDD (Gen3)
ESDF 600 GB (AIX/Linux) 15K RPM SAS HDD (Gen3)
ESDN 571 GB (IBM i) 15K RPM SAS HDD (Gen2-S)
ESDP 600 GB (AIX/Linux) 15K RPM SAS HDD (Gen2-S)
Note:
1. Any feature code that is listed in this table and is installed in your system decreases the maximum wet bulb
temperature that is allowed during shipping from 29°C (84°F) to 28°C (82°F).
Table 7. Noise emissions for the 8408-44E
1, 2, 3
Product description
Declared A-weighted sound power level,
L
Wad
(B)
Declared A-weighted sound pressure level,
L
pAm
(dB)
Operating Idle Operating Idle
Model 8408-44E
(2-socket) with a
typical workload
(25°C (77°F), 500 m
(1640 ft.)).
7.6
4
7.2 60 54
Model 8408-44E
(2-socket) with a
typical workload with
acoustical doors (25°C
(77°F), 500 m (1640
ft.)).
7.0 6.5 56 47
10 Site and hardware planning
To Next Page
Loading...
Need help?
General