Table 110. Environment requirements (continued)
Environment
Recommended operating
requirements
Allowable operating
requirements
Nonoperating
requirements
Shipping temperature -40°C to 60°C (-40°F to
140°F)
Shipping relative humidity 5% - 100%
1. Nominal cubic feet per minute (CFM) is approximately 2030. Maximum CFM is approximately 4025.
2. Derate maximum allowable dry-bulb temperature 1°C (1.8°F) per 175 m (574 ft) above 950 m (3117 ft).
Table 111. Noise emissions
1, 2, 3
Product description
Declared A-weighted sound power level,
L
Wad
(B)
Declared A-weighted sound pressure level,
L
pAm
(dB)
Operating Idle Operating Idle
Model 7063-CR1
(1-socket) FC EKB0
7.8
5
6.8 62 50
Model 7063-CR1
(1-socket) at
maximum
temperature and
operation.
8.7
4, 5
8.7
4, 5
69 69
Model 7063-CR1
(1-socket) at
maximum
temperature with
acoustical doors
(front and rear), FC
EC08 and FC EC07,
installed.
7.9
4, 5
7.9
4, 5
63 63
Notes:
1. Declared level L
Wad
is the upper-limit A-weighted sound power level. Declared level L
pAm
is the mean
A-weighted emission sound pressure level that is measured at the 1-meter bystander positions.
2. All measurements made in conformance with ISO 7779 and declared in conformance with ISO 9296.
3. 10 dB (decibel) equals 1 B (bel).
4. Under certain environments, configurations, system settings, and workloads, fan speeds are increased that result
in higher noise levels.
5. Notice: Government regulations (such as those prescribed by OSHA or European Community Directives) might
govern noise level exposure in the workplace and might apply to you and your server installation. This IBM
system is available with an optional acoustical door feature that can help reduce the noise that is emitted from
this system. The actual sound pressure levels in your installation depend upon various factors, including the
number of racks in the installation; the size, materials, and configuration of the room where you designate the
racks to be installed; the noise levels from other equipment; the room ambient temperature, and employees'
location in relation to the equipment. Further, compliance with such government regulations also depends upon
various extra factors, including the duration of employees' exposure and whether employees wear hearing
protection. IBM recommends that you consult with qualified experts in this field to determine whether you are
in compliance with the applicable regulations.
Electromagnetic compatibility compliance: CISPR 22:2008; CISPR 32:2012, CNS 13438 (Taiwan); EN
55032:2012 (EU, Australia); EN 55024:2010 (EU); EN 61000-3-2:2014 (EU, Japan); EN 61000-3-3:2013 (EU);
FCC, Title 47, Part 15 (USA); GB 9254-2008 (China); GB 17625.1-2012 (China); GB 17625.2-2007 (China);
⌂⌂⌂⌂ 30804.3.2-2013 (IEC 61000-3-2:2009) (EAEU); ⌂⌂⌂⌂ 30804.3.3-2013 (IEC 61000-3-3:2008) (EAEU); ⌂⌂⌂⌂
30805.22-2013 (CISPR 22:2006) (EAEU); ⌂⌂⌂⌂ CISPR 24-2013 (EAEU); ICES-003, Issue 6, January 2016
(Canada); KN 32:2015 (Korea); KN 35:2015 (Korea); TCVN 7189:2009 (Vietnam); VCCI, April 2015 (Japan)
Site and hardware planning 83
To Next Page
Loading...
Need help?
General