Installing Adapters
Before you begin:
Read “Safety Considerations” on page 4-2 and “Handling Static Sensitive
Devices” on page 4-3.
Read the instructions that came with the adapter.
If you are installing a graphics adapter, refer to the
PCI Adapter Placement
Reference
before choosing the slot for the adapter.
For other adapters, refer to Appendix B, “Adapter Placement Notes” on
page B-1 for placement requirements.
Remove the system unit cover (see “Removing the Cover” on page 4-4).
1. If you are also installing:
Memory modules, go to “Installing Memory-Modules” on page 4-24, and then
return here.
A processor card (Model 240 only), go to “Installing a Processor Card” on
page 4-63, and then return here.
2. Check the instructions that came with the adapter for setting jumpers and
switches.
4-70
7043 43P Series User's Guide
To Next Page
Loading...
