Installing an Ultra SCSI Adapter Cable
Before you begin:
Read “Safety Considerations” on page 4-2 and “Handling Static Sensitive
Devices” on page 4-3.
Remove the system unit cover (see “Removing the Cover” on page 4-4).
You can install an optional Ultra SCSI adapter in your system unit to provide faster
data transfer rates with hard drives that support the Ultra SCSI interface.
Before installing the Ultra SCSI adapter, you must first plan the routing of the Ultra
SCSI cable within the system unit. The Model 140 and Model 240 configurations
differ. If you have a Model 140, continue with the following step. If you have a Model
240, go to “Installing an Ultra SCSI Adapter Cable in a Model 240” on page 4-85.
4-82
7043 43P Series User's Guide
To Next Page
Loading...
