Attention: Inserting the memory-module kit diagonally may damage the memory-
module kit.
4. Store any memory-module kits you are no longer using in a static-protective
package. Make a note of the kit size and speed for future reference.
5. Carefully set the memory card between the tabs of the latch mechanism. The
tabs must engage the jaws of the latch mechanism.
6. Rotate the latch mechanisms to lock the memory card in position.
7. If you have no more removal and replacement procedures to perform, place the
drawer in the rear operating position, as described in “Rear Operating Position”
on page 7-26.
7-30
RS/6000 Enterprise Server Model H50 Installation and Service Guide
To Next Page
Loading...
