IBM RS/6000 H50

Table 3-1 (Page 14 of 26). Firmware Error Codes.
Error Code Description Action / Possible Failing FRU
2BA00203 Service processor firmware update
error occurred, update not completed.
Error occurred while reading new
service processor CRC after updating
service processor firmware.
See error code 2BA00200 for recovery
procedure.
2BA00204 Service processor firmware update
error occurred, update not completed.
Error occurred while calculate CRC
write.
See error code 2BA00200 for recovery
procedure.
2BA00300 Service Processor reports Slow Fan
number 0.
1. Replace Fan 0.
2. If problem persists, replace Power
Supply.
3. Replace I/O Board. (See notes on
3-1.)
2BA00301 Service Processor reports Slow Fan
number 1.
1. Replace Fan 1.
2. If problem persists, replace Power
Supply.
3. Replace I/O Board. (See notes on
3-1.)
2BA00302 Service Processor reports Slow Fan
number 2.
1. Replace Fan 2.
2. If problem persists, replace Power
Supply.
3. Replace I/O Board. (See notes on
3-1.)
2BA00303 Service Processor reports Slow Fan
number 3.
1. Replace Fan 3.
2. If problem persists, replace Power
Supply.
3. Replace I/O Board. (See notes on
3-1.)
2BA00309 Service Processor reports Generic
Cooling Alert.
1. Check for cool air flow obstructions
to the system.
2. Replace I/O Board. (See notes on
3-1.)
2BA00310 Service Processor reports CPU Over
Temperature Alert.
1. Check for cool air flow obstructions
to the system.
2. If the problem persists, replace
CPU Card
2BA00311 Service Processor reports IO Over
Temperature Alert.
1. Check for cool air flow obstructions
to the system.
2. Replace I/O Board. (See notes on
3-1.)
2BA00312 Service Processor reports Memory
Over Temperature Alert.
1. Check for cool air flow obstructions
to the system.
2. Replace Memory Card.
Chapter 3. Error Code to FRU Index 3-15