Using
E
Filer
the Filer
Mail
You
can use
the Mail
feature
to send and
receive
electronic
mail
(E-mail)
messages.
Simon
can
@nnect
to a Lotus-- cc:Mail.-
Post
Office
to send
and
receive
electronic
mail. You
can always
tell
how many messages
you
have
by
looking at the
message
list buttons
on the main Mail screen.
The
Received Messages
button shows
you
how many
messages
you
have in
your
Received Messages
list
(sometimes
called
an in-basket). The Ready to
Send button shows
you
how many messages
you
have
waiting to
send
(sometimes
called an
out-basket).
The Saved Messages button shows
you
how many
messages
you
have saved.
Setting
Up
Mail
With Mail,
you
send and
receive messages by
calling a computer set
up as a cc:Mail
post
office.
You
don't
have to
worry about how to set up a
post
office, because
your
E-mail administrator or service
does
that. However,
you
will not
be
able to send or
receive E-mail messages
until
you
set
up the Mail
feature in
Simon.
To set up
Mail,
you
need the
following information
from
your
E-mail
administrator:
Your
user
name
Your cc:Mail
password
The cc:Mail
post
office name
The
cc:Mail
post
office
phone
number
The
cc:Mail
post
office modem speed
After
you
get
this information, touch the Settings
button on
the main Mail screen. The
Mail
Settings
screen
will
appear.
Enter
your
cc:Mail
information
by touching the
appropriate button and using
the
on-screen keyboard
to type the information exactly
as the administrator
gave
it to
you.
The factory
setting for the
modem speed is 1200 bps.
Do not
change this unless
your
administrator tells
you.
To conserve Simon
memory,
you
can check
Receive
Only
Short
Messages. When
you
put
a
check
in this box by
touching it,
you
will only receive
Trademark of
Lotus Development Corporation.
Trademark of cc:Mail
lnc.
division of
Lotus Development Corp,
Select
Card Memory
'
Ae6s
L:.= I te
w
F"to
----__-l
I*l
Irr*--_l
50 User's
Guide
Simon
Features
51
To Next Page
Loading...
Need help?
General