IBM System/36 User Manual

Ordering the Work Station Cables
If you are not familiar with cables and the local electrical codes,
give the ordering cables task to someone, such as an electrician.
Make sure you have a copy of your floor plan.
1. To order preassembled cables:
1
a. Use part number 7362267 for each vinyl-covered cable or
part number 7362062 for each Teflon
2
-covered cable you
order.
b. Record the length of each cable in the following space:
Cable Number Length Cable Number Length
2. When the order is complete, review it to be sure that the cable
lengths match the floor plan.
3. Then, call your IBM marketing representative or your
IBM-approved remarketer and place the order. Your order will
take about 6 weeks.
4. If you want to order bulk cables (cables that you assemble
yourself), see Appendix A.
Each end of the cable will have a connector of the following dimensions:
23 mm
(0.91 inch)
f
59439062
Do not remove any connectors. If the cable must pass through a wall, be sure
that a large enough opening can be provided.
2 Trademark of E. I. duPont de Nemours & Co., Inc.
Planning and Ordering Work Station Cables 21

IBM System/36 Specifications

General

Brand	IBM
Model	System/36
Category	Desktop
Language	English