IBM System/36 User Manual

Preparing to Install the Work Stations
If you are attaching printers or display stations other than the
system console personal computer (PC) and its attached PC printer
to your system, you must do some preparation.
• If you are not familiar with work stations and how they connect
to the system, read the topic "About Work Stations ... "in this
manual for background information.
Even if you are familiar with work stations, at least review the
topic for any information that is specifically applicable for this
system.
• Make a floor plan of some kind to show where you want to
place your work stations and the cable path between them and
the computer. Some suggestions are given in this manual.
• Assign the addresses and device codes on the Work Station
Diagram forms (Forms F, H, Hl, and H2).
• Determine the cable lengths you need and order the cables.
• Prepare the cables for setup.
Preparing to Install the Work Stations 1

IBM System/36 Specifications

General

Brand	IBM
Model	System/36
Category	Desktop
Language	English