IBM System x3250 M4 7
Processor options
The server supports only one processor, which is already installed in all standard and Express models. No
additional processor options are available. The following table lists all processors available in standard
models of x3250 M4 or via CTO. If there is no corresponding
where-used
model for a particular processor,
then that processor is only available through the configure-to-order (CTO) process.
Table 4. Processor options
Part number Description Standard models where
used
None* Intel Pentium G840 2.8 GHz 2C 3 MB 1333 MHz DDR3 65W -
None* Intel Pentium G850 2.9 GHz 2C 3 MB 1333 MHz DDR3 65W 32x
None* Intel Pentium G860 3.0 GHz 2C 3 MB 1333 MHz DDR3 65W -
None* Intel Pentium G620 2.6 GHz 2C 3 MB 1066 MHz DDR3 65W -
None* Intel Pentium G630 2.7 GHz 2C 3 MB 1066 MHz DDR3 65W -
None* Intel Corei3-2100, 3.1 GHz 2C 3 M cache 1333 MHz DDR3 65 W 42x
None* Intel Corei3-2120, 3.3 GHz 2C 3 M cache 1333 MHz DDR3 65 W -
None* Intel Core i3-2130 3.4GHz 2C 3MB cache 1333MHz 65W -
None* Intel Xeon E3-1220 3.1 GHz 4C 8 MB cache 1333 MHz DDR3 80 W 62x
None* Intel Xeon E3-1220L 2.2 GHz 2C 3 MB cache 1333 MHz DDR3 20 W -
None* Intel Xeon E3-1230 3.2 GHz 4C 8 MB cache 1333 MHz DDR3 80 W -
None* Intel Xeon E3-1240 3.3 GHz 4C 8 MB cache 1333 MHz DDR3 80 W -
None* Intel Xeon E3-1260L 2.3 GHz 4C 8 MB cache 1333 MHz DDR3 45 W -
None* Intel Xeon E3-1270 3.4 GHz 4C 8 MB cache 1333 MHz DDR3 80 W 72x
None* Intel Xeon E3-1280 3.5 GHz 4C 8 MB cache 1333 MHz DDR3 95 W -
* No additional processor options are available. The server supports only one processor, which is already included in a
standard or custom configuration.
Memory options
The x3250 M4 has four DIMM slots, and only DDR3 ECC UDIMMs are supported. The CPU has two
memory channels and there are two DIMMs per channel. If more than one DIMM is planned to be
installed, then DIMMs must be installed in a pair, and both DIMMs in a pair must be identical in type and
size. The following table lists the memory options supported by the server.
Table 5. Memory options
Part
number
Description Maximum
supported
Standard models
where used
44T1568 1 GB (1x 1 GB, 1Rx8) PC3-10600 CL9 ECC 1333 LP UDIMM 4 -
44T1570 2 GB (1x 2 GB, 1Rx8) PC3-10600 CL9 ECC 1333 LP UDIMM 4 32x, 42x, 62x
44T1571 4 GB (1x 4 GB, 2Rx8) PC3-10600 CL9 ECC 1333 LP UDIMM 4 72x
90Y3165 8GB (4Gb, 2Rx8) PC3-10600 DDR3-1333 LP UDIMM 4 -
To Next Page
Loading...
Need help?
General
