IBM System x3850 X5 User Manual

Turning off the memory expansion module
The memory expansion module is turned off only if the connected server issues a
power-off request and you disconnect the memory expansion module power cord
from the power source. You cannot turn off the memory expansion module
manually.
Statement 5
CAUTION:
The power control button on the device and the power switch on the power
supply do not turn off the electrical current supplied to the device. The device
also might have more than one power cord. To remove all electrical current from
the device, ensure that all power cords are disconnected from the power source.
You can disconnect the memory expansion module power cords from the power
source to shut off all power immediately without damaging the memory expansion
module, but it might cause an unrecoverable error and loss of data on the
connected server.
Chapter 1. The System x3850 X5 and x3950 X5 server 27

IBM System x3850 X5 Specifications

General

Processor Cores	Up to 10 cores per processor
Chipset	Intel 7500
Hard Drive Interface	SAS/SATA
Processor	Intel Xeon E7-4800 series, Intel Xeon E7-8800 series
Memory Slots	64 DIMM slots
Storage	Up to 16 x 2.5" hot-swap SAS/SATA HDDs or SSDs
RAID Support	RAID 0, 1, 5, 6, 10
Network Interface	Integrated Gigabit Ethernet
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware vSphere
Form Factor	4U Rack