IBM ThinkPad T41 series User Manual

Key
combination
Description
Fn+F7 Switch a display output location
v External monitor (CRT display)
v Computer display and external monitor (LCD
+ CRT display)
v Computer display (LCD)
Note: For any operating system other than
Windows 2000 or Windows XP, no additional
procedure is needed; just press Fn+F7.
Notes:
1. This function does not work when different
desktop images are displayed on the
computer display and the external monitor
(the Extend desktop function).
2. This function does not work while a DVD
movie or a video clip is playing.
3. For Windows 2000 or Windows XP, a
hotkey application might take over the
switching function.
Fn+F8 Note: This function is not supported in
Windows 2000 and Windows XP.
If the image displayed on the computer is
smaller than the physical display, switch the
computer screen size between expanded mode
and normal mode.
(continued)
Product overview
ThinkPad T40, T40p, T41 Series 53

IBM ThinkPad T41 series Specifications

General

Operating System	Windows XP Professional
Weight	2.2 kg (4.9 lbs)
Chipset	Intel 855PM
Processor	Intel Pentium M
Display	14.1 inch
RAM	256 MB to 2 GB
Storage	30 GB to 80 GB HDD
Dimensions	311 x 255 x 26-30 mm
Display Resolution	1024x768 (XGA) or 1400x1050 (SXGA+)
Optical Drive	DVD-ROM, CD-RW/DVD-ROM Combo
Wireless	802.11b or 802.11g
Ethernet	10/100 Mbps
Battery	6-cell Li-Ion
Networking	Modem and Ethernet
Ports	2 USB 2.0, VGA, parallel, serial, infrared
Graphics	ATI Mobility Radeon 7500
Hard Drive Interface	Ultra ATA/100