Need help?Do you have a question about the IBM ThinkPad T41 series and is the answer not in the manual?
General| Operating System | Windows XP Professional |
|---|---|
| Weight | 2.2 kg (4.9 lbs) |
| Chipset | Intel 855PM |
| Processor | Intel Pentium M |
| Display | 14.1 inch |
| RAM | 256 MB to 2 GB |
| Storage | 30 GB to 80 GB HDD |
| Dimensions | 311 x 255 x 26-30 mm |
| Display Resolution | 1024x768 (XGA) or 1400x1050 (SXGA+) |
| Optical Drive | DVD-ROM, CD-RW/DVD-ROM Combo |
| Wireless | 802.11b or 802.11g |
| Ethernet | 10/100 Mbps |
| Battery | 6-cell Li-Ion |
| Networking | Modem and Ethernet |
| Ports | 2 USB 2.0, VGA, parallel, serial, infrared |
| Graphics | ATI Mobility Radeon 7500 |
| Hard Drive Interface | Ultra ATA/100 |
BIOS and device driver fixes are customer-installable. Support site and HelpCenter info provided.
General strategy for FRU replacement to prevent unnecessary expense and ensure proper servicing.
Instructions on diagnosing failures using displayed error codes or symptoms and the Symptom-to-FRU index.
Rules for working safely with electrical equipment, including tool usage and power disconnection.
Checklist to identify potentially unsafe conditions before performing service tasks on the computer.
Procedures for protecting ESD-sensitive parts to prevent damage from electrostatic discharge.
Electrical grounding requirements for operator safety and correct system function of the computer.
Important notes and guidance for service personnel before proceeding with computer checkout or FRU replacement.
Procedures for recovering system data using Access IBM Predesktop Area or recovery CDs.
Lists numeric error codes detected during POST or system operation and their corresponding FRU or action.
Lists error messages that may appear during system operation and the FRU or action required.
Step-by-step instructions for removing and installing the ThinkPad T40/T41 series battery pack.
Procedure for removing and installing the hard disk drive, with attention to physical shock and data backup.
Steps for removing and installing optional DIMM modules, including loosening and tightening screws.
Detailed steps for removing and installing the keyboard, including screw specifications and connector detachment.
Procedure for removing and installing standard DIMM modules, ensuring proper seating and locking.
Procedure for removing and installing the palm rest, noting tamper-resistant screws on some models.
Instructions for removing and installing the LCD assembly, including cable and antenna routing.
Steps for removing and installing the CPU, including releasing the lock and securing the CPU.
Procedure for removing and installing the system board and base cover, with notices for handling.
Steps for removing/installing LCD panel, cable, antenna, hinges, and cover.
To Next Page
