1. From the list of adapters, select the controller (channel) for the drives that you
want to mirror.
2. Select RAID Properties.
3. Select the type of array that you want to create.
4. Use the arrow keys to highlight the first drive in the pair; then, press the Minus
(-) or Plus (+) key to change the mirror value to Primary.
5. Continue to select the next drive using the Minus (-) or Plus (+) key until you
have all the drives for your array.
6. Press C to create the disk array.
7. Select Apply changes and exit menu to create the array.
56 System x3200 Types 4362 and 4363: User’s Guide
To Next Page
Loading...
