5.2 Insert battery
If the battery has not yet been inserted:
1. Unwrap battery.
2. Open battery compartment:
Push down the cover using your thumb
and slide back.
3. Insert battery.
The “+” symbol on the battery
must face up.
4. Close battery compartment.
If the battery has already been inserted:
1. Open battery compartment:
Push down the cover using your thumb
and slide back.
2. Remove battery.
3. Remove safety strip.
4. Reinsert battery.
The “+” symbol on the battery
must face up!
5. Close battery compartment.
To Next Page
Loading...