IBP SKEEN PATCH - 7 How to Clean and Care for Your SKEEN Patch; Cleaning; Changing the Patch

38
39
Position : Strengthening the
muscles of the upper eyelid
Apply the SKEEN Patch
between the temple and
the nostril: See picture to
the right! Select a moder-
ate intensity of stimulation
of level 4 or 5. Stimulate
each side of the face once
a day for 15 minutes.
Once you have applied
your SKEEN Patch to the
positions to on both
sides of the face, it equates to the maximum
overall application duration of 2 hours and
30 minutes per day.
7. How to clean and care
for your SKEEN Patch
7.1 Cleaning
1. Turn off the SKEEN Patch.
2. Clean the housing with a damp cloth.
► Do not clean the housing with
caustic or abrasive cleansers.
► Do not sterilize the electrode patch
or the device itself in a steam steril-
izer or in a cold sterilizing bath.
7.2 Changing the patch
Replace the electrode patch when it is
dirty or worn.
1. Turn off the SKEEN Patch.
2. Remove the electrode patch from the
SKEEN Patch.
3. Place the new electrode patch on the
SKEEN Patch.