7.3 Changing the battery
► Danger of poisoning and
suffocation!
Children could swallow batteries.
Keep batteries out of reach of chil-
dren.
► Do not throw batteries into fire.
► Only insert into the SKEEN Patch
batteries in compliance with
the specifications listed in the
“Technical Data” section
► Do not attempt to recharge the bat-
teries!
Change the battery as described in the
“Inserting the battery” section.
8. In case problems occur
Problem Possible Cause Solution
The SKEEN Patch is
switched on, but does not
function.
The battery is not inserted. Insert the battery.
The battery is empty. Replace the battery.
The SKEEN Patch is defective. Mail your SKEEN Patch to our
service department, see Service
and Warranty.
or
Dispose of the SKEEN Patch,
see Disposal and Environmental
Protection
The stimulation is too weak. The battery is low. Replace the battery.
The patch does not adhere
any longer.
The patch is dried out. Replace the patch.
To Next Page
Loading...