iCandy APPLE 2 PEAR - Attaching and Removing Newborn Nests

37
APPLE 2 PEAR
10a
10b
10a. Attaching the Pear 2 Newborn Nests:
(Shown with Raspberry Blue Flavour Pack
Hood - sold separately)
Orientate the lower Newborn Nest to face
forwards and insert the attachment arms
into the Apple 2 Pear lower adapter
brackets.
Push down on each side to engage.
10b. Orientate the upper Newborn Nest to
face rearwards and insert the attachment
arms into the Apple 2 Pear upper adapters.
Push down on each side to engage.
Check security of each nest by pulling
upwards.
WARNING: Check that the Newborn Nest
attachment devices are correctly engaged
before use.
IMPORTANT: The Pear 2 Newborn Nests
can only be fitted toe to toe in Pear 2
tandem mode.