19
PEACH
Lower Seat Unit
Important: The seat frame movement
mechanism is supplied in the transport
storage position.
6. To operate: Depress and hold both the
outer frame release ring and the central
release button simultaneously before
rotating the leg to the central position
Action on both sides of the seat before
fitting to chassis.
Important: Failure to do this will
result in damage to your seat.
7. Attaching lower seat unit:
Insert seat arms into lower
“Blossom” converter frame
sockets and push down firmly to
engage.
Note: Frame legs are grooved
to prevent incorrect orientation
(forward facing only).
8. To recline the seat unit:
Depress the central grey buttons
simultaneously and rotate into
the desired position.
9. To release and remove seat unit:
Remove the child. Depress the lower
portion of the grey outer rings of the
seat unit, the frame will “Jump up”.
The rings can be depressed
simultaneously or independently.
6
7
8
9
096-0011 Peach Instruction Manual.indd 19 27/10/2013 21:29
To Next Page
Loading...
