iCandy Peach 3 User Manual

PEACH
20
13
11
Upper / Main Seat Unit
Assembly & operation is the same as
the single stroller (see Section 2).
Important: Ensure that the seat frame
movement mechanism is taken out of
the store/transport position prior to
fitting (see page 8).
10. Seat stop screws x2:
Important: Fit the screws supplied to
the upper / main seat unit movement
mechanism this is essential to restrict
upper seat recline movement to
prevent interference with lower seat.
When assembled in “Blossom” Tandem
mode the main / upper seat unit is not
suitable from birth.
11. Attaching upper seat unit:
Insert seat arms into upper “Blossom”
converter frame sockets and push down
firmly to engage.
12. Reclining the seat unit: Depress the
central grey buttons and rotate into the
desired position.
Important: Recline is restricted to
2 positions to prevent interference
between upper and lower seats.
13. Releasing & removing upper seat
unit: Remove child first. Depress lower
portion of the grey outer ring on each
side of seat unit, the frame will “Jump
up”. The rings can be depressed
simultaneously or independently.
12
10
096-0011 Peach Instruction Manual.indd 20 27/10/2013 21:29

iCandy Peach 3 Specifications

General

Chassis Material	Aluminium
Adjustable Handlebar	Yes
Reversible Seat	Yes
Brake Type	Foot brake
Basket	Large shopping basket
Seat back height	50 cm
Seat to canopy height	60 cm
Seating Capacity	1
Handle Height	95 - 105 cm
Wheels	Puncture-proof tyres
Harness	5-point
Recline	Multi-position
Hood	Extendable
Suitable Age Range	From birth (with carrycot) or 6 months to 25kg (seat unit)
Suspension	All-round suspension