PEACH
8
Section 2 - Seat Unit
Important: The seat frame movement
mechanism is supplied in the store /
transport position.
1. To operate: Depress and hold both
the outer frame release ring and the
centre recline button simultaneously
before rotating leg to centre position as
shown. Action on both sides of frame
before fitting to the chassis.
Important: Failure to do this will lead to
damage to your seat unit.
2. Removal of hood: Removing the hood
requires the use of the hood removal /
operation key.
3. Depress both locking tabs and allow
connectors to lift out of sockets.king
devices are engaged before
use.
1
2
3
096-0011 Peach Instruction Manual.indd 8 27/10/2013 21:27
To Next Page
Loading...
