English
Icare HOME tonometer Instruction manual for health care professionals
6. INTRODUCTION
The Icare HOME tonometer is a hand-held device for self-use.
The tonometer uses the rebound method. A small and light single-use probe makes
contact with the eye very briefly. The tonometer measures the deceleration of the
probe and the rebound time, and calculates the IOP from these parameters.
A measurement sequence includes six measurements. The probe moves to
the cornea and back during every measurement. As a result, after the six
measurements the tonometer calculates the final IOP and stores it with other
information in the tonometer’s memory, including date, time, eye identification
(right or left) and measurement quality.
The Icare HOME tonometer can record over one thousand measurement results.
You can copy the recorded measurement information to a PC through a USB cable.
7. PACKAGE CONTENTS
WARNING!
Keep the tonometer out of reach of children, because the probe base, battery compartment
cover and probes are so small that a child could swallow them.
PRECAUTION!
When you have opened the package, check for any external damage or faults, particularly for
damage to the case. If you suspect that there is something wrong with the tonometer, contact
the dealer who sold the tonometer to you.
The package contains:
• Icare HOME tonometer
• 10 sterilized single-use probes
• 2 batteries
• USB memory stick including
the instruction manual for health
care professionals and the Icare LINK
software
• USB cable for connecting the Icare
HOME tonometer to a PC with Icare
LINK software
• Instructions for downloading the Icare
LINK software
• Patient guide
• Support position tags
• Warranty card
• Carrying case
• Wrist strap
• Probe base cleaning container
To Next Page
Loading...
