Why my iCartech AURORA 2 Car Video System unit can not power on?
If your iCartech Car Video System unit won't power on, there are several potential causes. First, check if the unit fuse is blown and replace it with a new fuse of the correct rating. Also, verify the car battery fuse and replace if necessary. Lastly, an illegal operation might have occurred, so try resetting the unit.
What to do if iCartech AURORA 2 Car Video System has no audio output?
If you're experiencing no or low audio output from your iCartech Car Video System, consider these possibilities: * Check and correct any improper audio output connections. * Increase the volume level, as it may be set too low. * Inspect speakers for damage and replace if needed. * Adjust the channel balance to the center position if it's heavily biased. * Ensure speaker wiring isn't in contact with any metal parts of the car; insulate the connections if it is.
Why is my iCartech Car Video System remote control not working?
If the remote control for your iCartech Car Video System isn't working, the battery may be depleted. Try changing the battery. Also, ensure the battery is installed correctly.
How to fix poor sound quality on iCartech AURORA 2 Car Video System?
If you're experiencing poor sound quality or distortion with your iCartech Car Video System, it could be due to several reasons. Using a pirated disc can cause this issue, so try using an original disc. Additionally, the speaker power rating might not match the unit, in which case you should replace the speakers. Check the wiring and correct any wrong connections or shorted speakers.
What causes flashing image on iCartech AURORA 2?
If you notice a flashing image or interference on the screen of your iCartech Car Video System, the color system of the DVD disc may not match the monitor. Adjust the color system of the DVD disc or the monitor. Also, using a pirated disc can cause this, so use an original disc. Check if the video cable is damaged and replace it if necessary. Finally, ensure proper video signal connections by checking the wiring and correcting it if needed.
Why disc does not play back on iCartech AURORA 2 Car Video System?
If your iCartech Car Video System disc does not play back, ensure the disc is in good condition (not warped or scratched). If the disc is dirty or wet, clean it with a soft cloth. Make sure you are using a compatible disc inserted with the label side up. Finally, verify that the disc region code is compatible with the unit.
Why iCartech AURORA 2 Car Video System resets when engine is off?
If your iCartech Car Video System unit resets itself when the engine is off, there may be an incorrect connection between ACC and BATT. Check the wiring and correct it.
How to turn off warning information on iCartech Car Video System?
If warning information is constantly displayed on your iCartech Car Video System, the parking brake wiring is likely incorrect. Check the wiring and correct it.
What to do if iCartech AURORA 2 Car Video System says 'No disc'?
If your iCartech Car Video System says 'No disc', clean the disc with a soft cloth if it's dirty. Ensure the disc is inserted with the label side up. If there's no disc inside, insert one.
Why I cannot insert disc into iCartech AURORA 2 Car Video System?
If you cannot insert a disc into your iCartech Car Video System, it's possible that there is already a disc inside the unit. Eject the current disc and then insert the new one.
Details options for expanding the system's audio capabilities.
Outlines options for enhancing the system's visual output.
Describes the buttons, connectors, and indicators on the unit's front panel.
Explains the functions and layout of the remote control.
Provides guidelines and tips for effective remote control operation.
Step-by-step instructions for safely removing the remote control battery.
Step-by-step instructions for correctly installing the remote control battery.
Explains the safety feature that limits video playback based on parking brake status.
How to quickly mute and unmute the audio output.
Instructions for turning the unit on and off.
Information about audible tones confirming function selections.
How to switch between different media sources (Radio, Disc, USB, etc.).
Method for increasing or decreasing the audio volume level.
Accessing the menu to adjust audio equalization settings.
Choosing from predefined audio equalization modes (e.g., Flat, Powerful).
Fine-tuning equalizer settings like frequency, grading, and Q value.
Adjusting the audio balance between front/back and left/right speakers.
Accessing the menu to set the unit's date and time.
Configuring the timer for when the unit powers off.
Step-by-step process for setting the calendar date.
Switching between 12-hour and 24-hour clock formats.
Step-by-step process for setting the current time.
Setting a timer function often referred to as 'Desk Timer'.
Selecting the correct time zone for accurate time display.
Explains the visual interface of the radio tuner.
How to designate the radio as the active audio source.
Switching between different frequency bands like FM1, FM2, AM.
Methods for finding and selecting radio stations via tuning.
Information on storing and managing favorite radio stations.
Functionality to preview stored stations or scan for new ones.
Steps to manually save a currently tuned radio station.
Selecting a previously saved station from the presets list.
Adjusting seeking behavior to prioritize stronger signals.
Accessing the equalizer settings from the radio interface.
An introduction to the Radio Data System features.
Configuring RDS options like TA, AF, and PTY for enhanced radio info.
Explains Alternative Frequencies for improved station reception.
Automatic time synchronization via RDS CT signal.
Searching for stations based on Program Type (PTY).
Enabling automatic reception of traffic announcements.
How EON enhances traffic and alternative frequency information.
Choosing DAB as the active media source.
Overview of the interface elements for DAB playback.
Switching between available DAB frequency bands.
Explains the different modes for tuning DAB stations.
Function to preview stored DAB stations for a short duration.
Automatically searches for and stores available DAB stations.
Steps to manually save a DAB service to a preset.
How to remove previously saved DAB services.
Selecting a previously saved DAB service.
Searching for DAB services based on Program Type (PTY).
Controls for enabling or disabling the L-Band function.
Options for selecting different Service Link modes.
Information on supported disc types for playback.
Instructions on how to eject a disc from the player.
Explains the touch screen areas for DVD playback interface.
Using on-screen controls to manage media playback.
Functionality to start, pause, and resume playback of media.
Steps for connecting and using a USB storage device.
Procedures for safely disconnecting a USB device.
Instructions for inserting and removing SD memory cards.
Navigating between tracks, chapters, or files.
Browsing through folders to find specific media files.
Instructions for viewing picture files on the unit.
Setting playback modes for repeating tracks, chapters, or albums.
Enabling playback of a specific segment within a video.
Playing audio tracks in a random, non-sequential order.
Choosing audio output modes (e.g., stereo, mono) for VCDs.
Changing the displayed subtitle language for DVDs.
Selecting different camera angles for DVD playback.
Adjusting video display settings like brightness and contrast.
Displaying details about the current media playback.
Rotating image files for proper viewing orientation.
Zooming in on pictures for a closer inspection.
Showing the current progress and total duration of a track.
Steps to establish a connection with Bluetooth devices.
How to terminate a connection with a Bluetooth device.
Instructions for initiating phone calls using the Bluetooth connection.
Procedures for answering or rejecting incoming phone calls.
Configuring various Bluetooth operational parameters.
Explains A2DP and AVRCP for music streaming and control.
Basic operational guide for the digital video recorder.
Explains the meaning of the recorder's status indicators.
Important safety and handling advice for recorder installation.
Configuration options for the recorder, including time and format.
How to switch between PAL and NTSC video output standards.
How to access the main menu for DVR functions.
Selecting the desired video resolution and compression for recordings.
Adjusting the frames per second for video recording.
Setting the clock for accurate recording timestamps.
Configuring the automatic shutdown time for the DVR.
Adjusting the sensitivity of the impact detection sensor.
Setting the light frequency to prevent flicker in recordings.
Choosing the display language for the DVR interface.
Formatting the storage media used by the DVR.
Restoring the DVR settings to their factory defaults.
Adjusting screen settings like language, wallpaper, and key color.
Configuring general operational parameters like beep and radio area.
Calibrating the touch screen for accurate input response.
Detailed settings for date, time mode, desk timer, and time zone.
Configuring audio parameters such as subwoofer filter and loudness.
Adjusting video display options like mirror view and brightness.
Setting restrictions for DVD playback based on rating.
Setting specific volume levels for different audio sources.
Options to restore factory defaults or reset specific settings.
Connecting external audio/video devices via AV input.
Procedure to reset the unit when it becomes unresponsive.
Instructions on how to replace a blown fuse.
Connecting an iPhone for Siri voice control functionality.
Switching to and operating the TV tuner function.
Accessing and using the navigation system.
Customizing steering wheel buttons for unit control.
Covers general electrical and physical characteristics of the unit.
Technical specifications related to FM radio reception.
Technical specifications related to AM radio reception.
Technical specifications for the unit's LCD screen.
Technical specifications for the DVD playback functionality.
Technical specifications for the auxiliary audio input.
Technical specifications for audio output.
Technical specifications for video input and output.
Specifies operating and storage temperature and humidity ranges.
Lists compatible file formats for USB and memory cards.
Lists file formats that the unit cannot play.
Details supported formats for MP3 discs (CDs).
Lists compatible video file formats for playback.
Explanation of DVD regional coding and compatibility.
Important safety and handling guidelines for using discs.
Procedure for safely disconnecting the vehicle battery before installation.
Instruction to remove protective screws before operating the unit.
Guidance on how to replace the unit's fuse if it blows.
Step-by-step instructions for mounting the unit using a half-sleeve.
How to use the trim ring to achieve a clean finish after installation.
General| Brand | iCartech |
|---|---|
| Model | AURORA 2 |
| Category | Car Video System |
| Language | English |
To Next Page