Ice Hoopla - Accessing the Safety Sensors

Step 1:Remove the control panel cover
by removing the nine 5/32” Allen screws
shown.
Step 2:Then remove the twelve bolts
and screws shown here.
Lift up on the control panel assembly
and unplug the LED Connectors.
The Safety sensor is mounted
on the bracket which is mounted
to the cabinet with three 655
square screws.
This is accessed through the top
and behind the ticket dispenser.
The Safety sensor is mounted
on the bracket which is
mounted to the cabinet with
three 655 square screws.
This is accessed through the
top, behind the user control
panel.
Accessing the Safety Sensors.