Ice iE410 User Manual

23 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Operator & Parts Manual

Self_Contained Extractor

www.icecompanies.com

6210149U

REV.05(11-2016)

iE410

INTERNATIONAL CLEANING EQUIPMENT

Table of Contents

Questions and Answers:

M
Matthew SmithAug 1, 2025
Why does my Ice Floor Machine have poor pick up?
- B
  Bruce ArmstrongAug 1, 2025
  If the Ice Floor Machine has poor pick up, it could be due to several reasons: * Ensure the recovery lid is firmly tightened to prevent air leaks. * Check for and clean debris from the clogged float shut-off. * Drain the recovery tank if the float shut-off is activated. * Make sure the drain hose stopper is securely in place. * Ensure vacuum hose connections and cuffs are tight. * If you're pulling the machine too fast, slow down the cleaning operation. If the vacuum hose is defective, replace it. For damaged or loose pickup head shoes, contact an ICE Distributor.
D
Deanna BarberAug 16, 2025
How to fix uneven spray on my Ice Floor Machine?
- D
  David BradyAug 16, 2025
  If you're experiencing uneven or no solution spray from your Ice Floor Machine, consider these potential causes: * Ensure the solution tank is adequately filled. * Verify that the vacuum/pump switch is turned on. * Clean or replace dirty or plugged spray tips. * Inspect the solution tank filter; clean or replace it if plugged. * Check the solution hose for pinches or kinks; reroute or replace it if needed.

Ice iE410 Specifications

General

Brand	Ice
Model	iE410
Category	Floor Machine
Language	English

Summary

Safety Precautions

Self-Contained Extractor Set-Up

Machine Operation

Prior to Extracting Carpets

Steps before carpet extraction, including cable inspection and vacuuming debris.

Carpet Extracting

Detailed steps for operating the machine to extract carpet solution.

Operating Hints

Use of Accessory Tools

Draining Tanks

Machine Maintenance

Daily Maintenance

Procedures for cleaning and inspecting the machine after each use.

Monthly Maintenance

Scheduled maintenance tasks, including flushing and lubrication.

Machine Storage

Guidelines for storing the machine properly to prevent damage.

Basic Troubleshooting

Machine Components

Parts List

Technical Data

Wiring Diagram

Wear & Tear Parts

Related product manuals

Preview: Ice I18B