Iceco VL45 User Manual

07
Error Codes & Solutions
4
Error Code
※ The cooling fan overloads with more
than 1 A of current.
E2
Motor start error
※ The motor of compressor is blocked or
the pressure difference in the refrigeration
system is too high.
E3
Minimum motor speed error
※ The compressor overloads and the
motor can not maintain its minimun speed
1850 rpms.
E4
Thermal cut-out of electronic unit
※ Thermal cut-out error If the refrigeration
system overloads, or the ambient
temperature is too high, the thermal sensor
is overheated.
E5
※ The DC voltage is below the protection
setting and the battery protection mode is
activated.
E1

Iceco VL45 Specifications

General

Capacity	45 liters
Power Source	12/24V DC, 110-240V AC
Refrigerant	R134a
Power Consumption	45W
Cooling System	Compressor
Material	Plastic and metal