EasyManua.ls Logo

icetro A25B15 - User Manual

icetro A25B15
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
●
This machine cannot be used in any other country
where the electric voltage for its power supply is not available.
●
This product is designed for indoor installation.
Please be sure to install it indoors.
●
The external appearance, design, color, and components
of this machine may be changed without prior notice.
A25B15 / A25O15 / A25G15

Table of Contents

Questions and Answers

  • R
    Robert StantonAug 2, 2025
    Why is my icetro Ice Maker not operating?
    • Y
      ysolisAug 2, 2025
      Your icetro Ice Maker might not be operating due to several reasons. Ensure the ice maker is properly plugged in. Check the breaker and reset it if it has tripped; if it trips again, contact an authorized service center. Verify that the switch is set to “ICE” and not “OFF”. Also, the ice maker will stop when the ice tank is full, and the ice detection sensor is activated. After removing ice, wait 15~30 minutes for it to resume operation.
  • K
    kathleen07Aug 7, 2025
    What to do if the ice cubes from my icetro Ice Maker are white?
    • J
      Jacqueline CooperAug 7, 2025
      If the ice cubes from your icetro Ice Maker are white, it could be due to several reasons: * Check the water supply to ensure there's enough water in the tank and that there are no leaks. * Inspect the water supply valve. * If ice cubes are stuck on the vaporizer, check the water supply valve and the hot gas valve. * If the water isn't getting cold, check the water supply valve, and contact customer service if the valve is fine. * Verify that water is being sprayed and that the circulation pump is working. * If condensing isn't occurring, clean the condenser and check the fan motor. * If the condenser isn't working, check the ambient temperature or contact customer service. * If hot gas leaks, contact customer service.
  • J
    Joseph ChandlerAug 12, 2025
    What to do if ice cubes from icetro A25B15 Ice Maker are too small?
    • J
      James RamosAug 12, 2025
      If the ice cubes from your icetro Ice Maker are too small, it could be because the ambient temperature is too high. Remember, the lower the ambient temperature, the bigger the ice will be, and vice versa. Also, check the water supply to ensure there is enough water in the tank. Inspect the water nozzle to see if it is clogged. If the ice thickness control does not work, please contact customer service center.
  • M
    Matthew TaylorAug 17, 2025
    Why icetro A25B15 Ice Maker tank is not fully filled with ice cubes?
    • D
      Daniel KellyAug 17, 2025
      The ice tank will be filled with ice after about 12 hours of operation. Make sure the drain pipe of the water tank is properly connected and clean the drain. Check the site where the product is installed - hot air should not be blown to the tank.
  • K
    Karen GreenAug 23, 2025
    How to fix fragmented ice from icetro A25B15?
    • S
      Sheri RossAug 23, 2025
      If the ice from your icetro Ice Maker is fragmented, it could be because water is not accurately sprayed from the nozzle to the center of the vaporizer cube. Clean the ice maker, as the nozzle may be clogged with a foreign object.
  • C
    Carol LongAug 27, 2025
    Why are ice cubes too large in my icetro A25B15?
    • J
      John RobinsonAug 27, 2025
      If the ice cubes from your icetro Ice Maker are too large, it may be because the ambient temperature is too low. The lower the ambient temperature, the bigger the ice will be. If the ice thickness control does not work, contact the customer service center.

Summary

Safety Cautions

Power supply related items

Guidance on safe handling and use of the power cord and electrical connections.

Installation related items

Precautions and guidelines for safe installation of the ice maker.

Part names

Installation specifications

Space requirements for installation

Details on the necessary clearances and space needed for proper installation.

Requirements for power supply

Specifies the electrical requirements, voltage, frequency, and grounding.

Requirements for plumbing

Details on water supply connections, drain pipe requirements, and pressure.

What to check prior to installation

Installation of the Product

Changing Door-opening Method

Instructions on how to reverse the door hinges for left or right opening.

Specific Features

Guide to Operating the Ice Maker

Initial operation

Steps to follow for the first-time setup and initial ice production.

Using the ice maker

Instructions on how to operate the ice maker for daily ice production.

Washing the Ice Maker

Cleaning the nozzle; ice slide; water tank

Procedure for cleaning internal components like nozzles, ice slides, and the water tank.

Cleaning the filters of the water tank and ice tank

Steps for removing and cleaning the filter screens in the water and ice tanks.

Maintenance of the Ice Maker

Management in the coldest season

Instructions for preparing the ice maker for storage during cold weather.

Adjusting the ice maker

Information about adjustments and warnings regarding user modifications.

Specifications

Troubleshooting guide

icetro A25B15 Specifications

General IconGeneral
Brandicetro
ModelA25B15
CategoryIce Maker
LanguageEnglish

Related product manuals