Need help?Do you have a question about the iCheckTPMS IC005 and is the answer not in the manual?
General| Brand | iCheckTPMS |
|---|---|
| Model | IC005 |
| Category | Measuring Instruments |
| Language | English |
Introduction to the iCheckTPMS system and advice to read the manual before installation.
Explains automatic high/low pressure alarm setting based on benchmark pressure for ease of use.
Describes adjusting tyre pressure for off-road use and automatic alarm recalibration for convenience.
Details continuous data transmission from sensors, ensuring up-to-date PSI before driving.
Illustrates the monitor's buttons, display icons, solar panel, and power socket for identification.
Lists and shows icons for LCD Monitor, Non Slip Pad, USB Cable, Wheel Sensor, and other included items.
Step-by-step instructions for installing TPMS sensors on different vehicle models, including diagrams.
How to change pressure/temperature units and switch display to view spare tyre status.
Automatic setting of benchmark pressure for alerts based on cold tyre readings.
Procedure to adjust the high temperature alert threshold for wheel bearing sensors.
Instructions for activating caravan disconnect and connect features.
Steps to restore the monitor to its original factory default settings.
Essential tips for charging, checking tyre pressure, and monitor placement before installation.
Details battery saving mode, automatic backlight, and manual backlight control.
Information on solar charging capability and how to mute audible alarms.
Explains how the monitor displays up to 10 tyres and 4 bearing sensor data across different interfaces.
Describes the icon that indicates the signal booster is active and receiving data.
Details all possible alarm types, their icons, and alert conditions like pressure, temperature, and battery status.
Step-by-step guide to pair new or replaced TPMS sensors with the monitor.
Instructions for activating and pairing wheel bearing sensors to ensure proper function.
Guide on preparing wheel hubs and attaching bearing sensors using adhesive.
Guidance on understanding bearing temperature readings relative to ambient and identifying potential issues.
Lists technical parameters for the iCheckTPMS monitor, including dimensions and operating temperatures.
Details technical specifications for TPMS sensors, covering pressure range, temperature accuracy, and battery life.
Details technical specifications for wheel bearing sensors, including temperature accuracy and battery life.
Step-by-step instructions for replacing the CR1632 battery in a TPMS sensor.
Addresses queries on using with factory systems, battery life, waterproofing, and wheel balancing.
Clarifies factors like sunlight affecting tyre temperature and the optional nature of dust covers and lock nuts.
To Next Page