Ickle Bubba Astral - Adjusting the Handle Position; Fitting the Hood

10
1. To be used when installing in the car
2. To be used when carrying the car seat by hand
3. To be used when placing the child in or out of the infant car seat
4. Full recline, to be used when placing the child in or out of the
infant car seat
1
2 3 4
Adjusting the Handle Position
Fitting the Hood
To adjust the position of the handle, press the red buttons on both
sides of the handle and adjust it to the position you want. There are 4
possible positions:
When the handle is adjusted to the desired position, ensure that it
is locked in place. When locked, the red button will pop up
automatically and you will hear a clear "click" sound.
1. Fasten both zips around the handle, and stretch the elastic
edge around the back of the car seat
2. Locate the elastic loop on each side of inner hood and
stretch over the plastic notch located near the red handle
button.
3. Pull the back of the canopy over the back of the car seat.
v.02.20